- Ios Images For Gns3 Download
- Cisco 7200 Ios Image Download
- Gns3 Ios Images 7200 15
heavymd.netlify.com › Cisco 7200 Router Ios Image Free Download For Gns3 ► ►
Page 2 of 3
| [ 22 posts ] | Go to pagePrevious1, 2, 3Next |
| Print view | Previous topic Next topic |
|
| Author | Message |
|---|
Posted: Mon Sep 01, 2014 5:13 pm |
|
Joined: Tue Aug 26, 2014 2:13 pm
Posts: 12 | So what are my options since I can't run out and buy a 64 bit machine or start buying Cisco equipment.
Are you saying that I can't run GNS3. Is there no other resource available to help me get this thing going.
|
|
| Top |
How do you build Cisco networks in GNS3? In this video I show you how to download Cisco IOS images (Cisco VIRL images) to run IOSv and IOSvL2 in your GNS3 to. I do most of my network simulations in GNS3. And there I also need Cisco IOS / Juniper images. In this post I’ll try to explain how to make following setup: 2 Cisco 7200 routers; 1.
Joined: Thu Jul 10, 2014 4:46 pm
Posts: 57 | So what are my options since I can't run out and buy a 64 bit machine or start buying Cisco equipment.
Are you saying that I can't run GNS3. Is there no other resource available to help me get this thing going. I never said you CAN'T run GNS3. Just sort out that cygwin stuff, and it'll probably work fine. That error I quoted in your post mentioned an environmental option in cygwin to set to avoid that error. Like I said, PM the folks on the board like rednectar, brezular, or the GNS3 creators, and they could either help you, or point you to the right resource. If I knew how, I'd help you out, but I'm swamped studying for a cert exam tomorrow, or I'd spend the time researching how to fix your issue. If you can wait until friday or saturday (super busy wednesday and thursday, too), I'll have spare time then. And you don't need to buy a 64-bit machine. Almost all CPUs for the last 5 years or so already support 64bit. You'd just have to upgrade the OS. HERE is the Cygwin homepage (Red Hat owns them now). HERE is the wiki for Cygwin. And try googling 'cygwin and GNS3'. Maybe others have had the same problem that you are. *EDIT* Full disclosure, the only time I've ever dealt with anything approaching UNIX or POSIX is using Linux Mint 17 and Haiku in a Virtualbox VM for tacacs+, atftpd, and Radius in GNS3, and a long time ago, I built an image of slackware from the kernel up to create a commodity 'captive portal' wifi system back when bluesockets and colubrises (colubrii?) cost a thousand dollars or more. My cost of goods was like $300 (mostly for the SBC, NEMA4 enclosure, and antennas), and I managed to fit that custom slackware image onto a 64MB compact flash (48MB for slackware, the remainder as a R/W partition). But that was back in '99-'00, so that knowledge has long since been forgotten.
|
|
| Top |
Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England | A heads up for you re: Cygwin - Cygwin is used to compile Dynamips to allow it to be run on Windows, so that is where the references are from.
_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
|
|
| Top |
Joined: Thu Jul 10, 2014 4:46 pm
Posts: 57 | A heads up for you re: Cygwin - Cygwin is used to compile Dynamips to allow it to be run on Windows, so that is where the references are from. Any idea what would stop his IOS image from loading/running? I'm at a loss on how to help shoer.
|
|
| Top |
Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia | As Daniel says, don't get caught up about cygwin - you will find that there are a couple of cyg*.dll files in your GNS3 install directory - that's all the cygwin you need to run GNS3.
@shoer - you should be able to get GNS3 working. However, I'd start by taking things slowly and doing things using the system defaults - ie - let GNS3 create the GNS3 directory off your %HOME% directory and the Images directory off that.
If that works, then you can experiment with E:/ drive etc for storing images. You might also try reading the free chapter from the GNS3 Network Simulation Guide, either here or (possibly better format) here
Disclaimer: I am the author of the GNS3 Network Simulation Guide
_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs
|
|
| Top |
Joined: Tue Aug 26, 2014 2:13 pm
Posts: 12 | I have removed GNS3 and done a reinstall of GNS3-0.8.7-all-in-one.
I have used all the defaults and put my uncompressed image in to the
default image folder. Dynamips starts when I test it but when I use
Test Settings I still get 'Unable to initialize router instance.'
The only thing I can think it is at this point is my image, and I have 3
different ones, is bad.
Since I don't know anyone with Cisco equipment I'm searching the Internet
to try and find an IOS.
It's possible all 3 are bad but the variables are still image and GNS3.
|
|
| Top |
Joined: Thu Jul 10, 2014 4:46 pm
Posts: 57 | |
| Top |
Post subject: Re: cisco ios |
|
Joined: Tue Aug 26, 2014 2:13 pm
Posts: 12 | OK I think what I'm doing is correct.
I can get a c3600 and a c7200 router to work. I am not able to get
a c2600 router to work, and at this point I have used several versions
of 2600 IOS, including the one I used on my old XP Pro OS.
If I drag a router c2600 on to the screen I get the following error.
R1: error from server 127.0.0.1:7200: 209-unable to start VM instance 'ghost-
c2600-adventerpriske9-mz.123-14.T2.image-127.0.0.1.ghost'
I have used defaults for everything and the version of GNS3 is GNS3 0.8.7
Why doesn't the 2600 router work??
|
|
| Top |
Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England | From my personal experience your mileage will vary with some routers. The 3 most stable seem to be 3600, 3725/45, 7200
_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
|
|
| Top |
Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada | From my personal experience your mileage will vary with some routers. The 3 most stable seem to be 3600, 3725/45, 7200 I can second that. I always go with these and rarely get any issues.
_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.
|
|
| Top |
Page 2 of 3
| [ 22 posts ] | Go to pagePrevious1, 2, 3Next |
Download Cisco IOS image for GNS3
Hi dear all, that’s really a great to share my hard work with you , After a lots of hit in Google I finally found trick to search Cisco IOS in free of course. So without talking much here are the link where you can free download Cisco ios image and you can upload or use this ios to the router and as well as in GNS3.
Small Collection of IOS Images.
ftp://ftp.unikon-ua.net/pub/Cisco/IOS/
{Updated}Big Collection of IOS Images (Almost All Cisco IOS Images)
ftp://62.117.115.92/upload/ios/
Another Big Collection
Ios Images For Gns3 Download
Download bleach all episode subtitle indonesia mkv. (NEW)Cisco IOS Images Big Collection v3. **Direct HTTP Link**
http://www.jonsfiles.com/IOS%20Images%20for%20GNS3/Cisco_IOS_Collection/IOS/
http://www.intranet.betomt.com.br/repositorio/IOS/CISCO/ASA Binary files for GNS3
http://www.4shared.com/dir/5716575/72cbe353/IOS.html
New Big IOS Collection
• Map the drive where you want to store the images. Ghost boot disk wizard. Set the location of the automation agent to be used with the configuration and click Next. Enter the account credentials to be used to connect to the file server and click Next. • Select the workgroup/Domain that the client computer should connect to. • Set the Port number and the IP address of the server using which the client computer should communicate with the Ghost Solution Suite Server.
| Print view | Previous topic | Next topic |
|
Cisco 7200 Ios Image Download
| Author | Message |
|---|
Posted: Mon Mar 11, 2013 9:57 pm |
|
Joined: Tue Dec 28, 2010 5:10 am
Posts: 90
Location: INDIA | Dear Jermy/team,
can you please say me why there is a error messege happens as i give the # sh flash: command please see the screenshot
it happens alway and to store any CME file i have to fortmat disk0: and store there ...
| Attachments: |
7200ioserror.jpg [ 200.98 KiB | Viewed 6250 times ]
| flasherror7200.xlsx [227.07 KiB]
Downloaded 205 times
|
Last edited by aksplease on Wed Mar 13, 2013 10:18 pm, edited 1 time in total. |
|
| Top |
Posted: Wed Mar 13, 2013 8:41 pm |
|
Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia | Tip: add pictures as jpg, not xlsx!! Can't view xlsx on my ipad!
_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs
|
|
| Top |
Posted: Thu Mar 14, 2013 10:05 am |
|
Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England | I belive this is the reason why: https://supportforums.cisco.com/docs/DOC-2667. Basically to summarise: Look at the size of the device in slot 0. Flash cards are available in sizes up to 20MB. Flash disks begin at 48MB, and are available in sizes up to 256MB.
If you have a flash disk, issue disk commands for Flash disks, as shown in the following command output: So it is dependant upon the size of the device in slot0. less than 20MB - sh flash: 48MB or greater - sh disk0:
_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
|
|
| Top |
Posted: Thu Mar 14, 2013 10:45 am |
|
Joined: Tue Dec 28, 2010 5:10 am
Posts: 90
Location: INDIA | dear claydon_dan
thanks for your reaply but can u say me how can i run the show flash command scuccessfully in GNS#3.
is it possible in gns3 or not to find a flash memory in 7200 series router in gns#3 ?
regards
aksplease
|
|
| Top |
Posted: Thu Mar 14, 2013 11:39 am |
|
Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England | I have just tried reducing the size of the disk in GNS3, but it still shows as disk0:, so it looks like it wont show up as flash:
Unfortunately I don't have a physical 7206 so can't do a real world test.
_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
|
|
| Top |
Posted: Fri Mar 22, 2013 5:37 pm |
|
Joined: Mon Nov 10, 2008 10:31 am
Posts: 555
Location: Slovakia | Hi,
I have the same issue. Your flash should be presented as disk0: for 7206 VXR router.
Below is the output from show ver command.
show ver
....
524288K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
1048576K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Seems that disk0 and disk1 are presented in the router, right? But command show file systemsdoesn't show any capacity for disk0 and disk1.
But it is true for Version 15.2(4)S2. Once I run 7206 with older IOS - 12.4(24)T5 disk0 is presented in the output of show file systemsand I can normally work with it (mkdir, copy, format etc.)
It seems that the failure of not recognizing disk0/disk1 properly is somehow dependent on the version of IOS. I think we should make more test with different IOS and Dynamips version.
Dynamips 0.8.2RC3
GNS3 0.8.4RC2
UPDATE:
Version 15.1(4)M2 is without issue. Maybe bug in Version 15.2(4)S2?
_________________
Brezular
All my tutorials can be found here:
http://brezular.com
|
|
| Top |
Posted: Mon Mar 25, 2013 5:51 pm |
|
Joined: Tue Dec 28, 2010 5:10 am
Posts: 90
Location: INDIA | hi
i tested as per the IOS name given by you on dynamip RC5 (gns3 0.8.4 rc2 ) .problem is same so so should i change the dynamip to rc4 for the result . ?
|
|
| Top |
Gns3 Ios Images 7200 15