The following troubleshooting tips can help diagnose and correct most concerns with the A2+ Wireless. We have attempted to make this list as comprehensive as possible, so some of these may not apply to your issue, but please go through each tip. Add the Audioengine D1 DAC to your system, though, and you'll enjoy dramatically better sound. You can even get the most out of high-res 24/96 music files! The D1 is compatible with both Mac and PC, and requires no drivers; simply connect it to your computer using the included USB cord and you're ready to go.
- Audioengine D1 Drivers For Macbook Pro
- Audioengine D1 Driver Mac
- Audioengine D1 Drivers For Mac Windows 10
I'm new to this forum but I would like to ask for your opinion on some questions I have. I just bought a DAC (Audioengine D1) because I wanted to give the 'best' sound quality to my headphones (Sennheiser Game One), but my audio knowledge is limited so here I am. Although everything. The Audioengine D1 Audioengine. Audioengine is one of my favorite brands. For me it all started with their petite A2 speakers ($199/pair), and then I gushed over their P4 speakers ($249/pair).
DAC type
USB and Optical
Inputs
USB audio
SPDIF Optical
D/A converter
AKM4396
USB transfer mode
Asynchronous dual clock
USB controller
TI1020B
USB device class
Type 1.1 or above
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Outputs
Analog RCA L/R stereo
Analog 3.5mm mini-jack stereo
Full-scale output level
2.0V RMS
Output impedance
2 ohms
Recommended headphone impedance range
10 ohms to 10K ohms
Headphone amplifier
OPA2134
Optical receiver
CS8416
Frequency response
10Hz-25KHz (+/- 0.5dB)
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) <0.0025% Crosstalk
-85db
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Power requirement
USB 5V DC, 200mA
USB power filtering
2-stage redundant regulation
Product dimensions
3.5×3.75×1″ (89x95x25mm)
Shipping weight
1.0lbs (0.5kg)
Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing
Audioengine D1 Drivers For Macbook Pro
Included accessories
USB cable, 2ft
Setup guide
Microfiber bag
D1 Internal Converter
The D1 uses the AK4396 DAC, which is well-regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D1 presents impressive low noise and low distortion characteristics. The D1 can process digital audio at any bit depth up to 24-bits and any sample rate up to 192kHz.
D1 Headphone Amplifier
The D1 includes a headphone amp based on the TI OPA2134 low noise opamp. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.
D1 Power
The D1 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality.
D1 Volume Control
Volume is controlled directly from the D1 front panel via the digitally-controlled analog potentiometer.
VERSATILE
The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player. And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.
DESIGNED FOR THE COMPUTER AUDIOPHILE
D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.
EASY SETUP
Audioengine D1 Driver Mac
Setup is easy and no special software is needed, making D1 a true plug-and-play solution. The D1 outputs connect to any audio system or powered speakers, such as the Audioengine A5+ or A2. Power for the D1 is provided via the USB bus so there is no external power supply to connect.
D1 USB
The D1 utilizes the TI1020B USB controller, widely recognized as a standard for higher-end USB audio products. The D1 is powered directly from the USB bus and USB power is passed through two stages of regulation to ensure high stability and low noise.
D1 DAC
The D1 uses the AK4396 DAC, well regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D1 presents impressive low noise and low distortion characteristics.
D1 HEADPHONE
Audioengine D1 Drivers For Mac Windows 10
The D1 includes a headphone amp based on the TI OPA2134 low noise opamp. This headphone amp is able to provide low-impedance, high-fidelity audio to a wide range of headphones and supports headphones with impedance as low as 20 ohms.